Building Construction MCQ's Test NO 1

Building Construction MCQ's Test NO 1

1 The service area in a building means the area occupied by ?

A) Stairs
B) Toilets
C) Light and shafts
D) All of the above

... Answer is D )
The service area in a building means the area occupied by is " All of the above "

2 Pick up the correct statement from the following: ?

A) A mortar joint having a concave finishing in brick masonry, is called keyed joint
B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint
C) A mortar joint having a recess in it, is called ruled joint
D) All the above

... Answer is D )
Pick up the correct statement from the following is " All the above "

3 Cast iron piles ?

A) Are suitable for works under sea water
B) Are suitable for works under sea water
C) Are suitable for use as batter piles
D) ) Are useful for heavy vertical loads

... Answer is D )
Cast iron piles is “) Are useful for heavy vertical loads "

4 The form work from the slabs excluding props, can be removed only after ?

A) 1 day
B) 3 day
C) 4 days
D) 7 days

... Answer is C )
The form work from the slabs excluding props, can be removed only after " 4 days "

5 The process of filling hollow spaces of walls before plastering, is known ?

A) Hacking
B) Dubbing out
C) Blistering
D) Dubbing out

... Answer is D )
The process of filling hollow spaces of walls before plastering, is known " Dubbing out "

6 The type of arch generally constructed over a wooden lintel or over a flat arch for the purpose of carrying the load of the wall above is

A) Segmental arch
B) Pointed arch
C) Relieving arch
D) Flat arch

... Answer is C )
The type of arch generally constructed over a wooden lintel or over a flat arch for the purpose of carrying the load of the wall above is " Relieving arch "

7 The platform at the end of a series of steps, is known as ?

A Platform
B) Relief
C) Rest
D) Landing

... Answer is D )
The platform at the end of a series of steps, is known as “0.274 m3 "

8 The pile which supports the load due to friction between pile face and surrounding soil, is generally known as ?

A) Bearing pile
B) Friction pile
C) Sheet pile
D) All the above

... Answer is B )
The pile which supports the load due to friction between pile face and surrounding soil, is generally known as is " Friction pile "

9 The type of roof which slopes in two directions with a break in the slope on each side is known as ?

A) Gable roof
B) Hip roof
C) Gambrel roof
D Mansard roof

... Answer is C )
The expected out turn for earth work in excavation in ordinary soil per workman per day is ” Gambrel roof "

10 The inclined surface of an abutment to receive the arch, is known as ?

A) Skew back
B) Soffit
C) Spandril
D) Haunch

... Answer is A )
The inclined surface of an abutment to receive the arch, is known as “ Skew back "
 

Vist to online MCQ's Test of Estimating And Costing

Vist to online MCQ's Test of Surveying & levelling