Definition:
The smooth surface used
to cover the top of the room is called the Slab.
There are two types of reinforcement cement concrete slab for design.
One-way
slab
Two-way
slab
If the length and width
of the slab is two or more, then such a slab is called a One-Way Slab. The main bars in this slab are used
to direction the width and Distribution bars are used along the length. The
different shapes of One Way Slab are
cylindrical. One Way Slab is supported on
been on two opposite sides. In One Way Slab loads
are carried along One Direction. One Way Slab is
required more depth.
If the ratio of the
length and width of the slab is equal to two or less, then such a slab is
called Two-Way Slab. The steel used on both
sides of this type of slab and is called the main bar. In this slab the
concrete cover is placed outside of the steel from one centimeter to two
centimeters. Steel reinforcements are used in cement reinforcement’s concrete
structures. The different shapes of Two-Way Slab
are dish or saucer. Two-Way Slab supported beams on all the
four sides. Two-Way Slab loads are carried
along both directions. Two-Way Slab is
required more depth.
 |
| SLABS AND TYPES OF SLABS |
The edges of these
steels are made of steel so that the seam sticks well to the concrete. Modern
types of steel are used in modern times. Whose surface is made rough or bushy. Such
steel is called demand steel. There is no need for hooks for on-steel because
their surface is rough and becomes a strong pair. Steels have to be bent to
make cement concrete structures. Therefore the steel must be soft. To lengthen
steel, when two steels are joined, a vertical joint is applied up to thirty
times the diameter, and for a horizontal joint, up to forty times the diameter.
(if you want to lean the full topic relate to bearing capacity then visit to blow link)
0 Comments